Drum type cleaning machine has a wide range of applications, such as drum type brush cleaning machine used in turnover industry, food box cleaning machine used in food industry, chocolate tray used to wash very dirty, and processed parts used in hardware industry, because the cleaning of baskets requires a lot of labor, and the cleaning degree also has certain limitations. In order to be considerate of customers, drum type cleaning machine is widely used Our company absorbs the advantages of advanced equipment at home and abroad, into a number of new technologies.

 

The product is widely used in the food industry and machinery parts industry, now more and more enterprises begin to use the cleaning machine. When we use it, we need to carry out the necessary safety inspection, which is to ensure that when we use the equipment, it can operate normally. So what are the safety inspections for its use? Let's learn about it together. I hope users will pay special attention to it next time.

 

1. Before use, the machine should be placed on the dry and ventilated horizontal ground to ensure the smooth and reliable operation of the equipment.

 

2. Check whether the power supply voltage is consistent with the applicable voltage of the product.

 

3. Check all parts before use to see if the fasteners are loose during transportation, if the power cord is damaged due to transportation, and if there is any foreign matter between the brush rollers.

 

4. When wiring the roller brush cleaning machine, extend the power cord on the equipment, reliably ground the yellow and green wire with grounding symbol, connect the other three wire cores to the outgoing line terminal of the circuit breaker, and fix the circuit breaker firmly. Close the circuit breaker to see if the direction of brush roller rotation is the same as that required by the manufacturer. Otherwise, adjust two of the cores to the correct direction, and then conduct no-load test run.

 

5. There should be no shock, vibration or abnormal sound when the vehicle is running empty. Otherwise, the vehicle should be shut down for inspection. After the fault is eliminated, the water source should be connected, and the drainage dustpan should be aligned with the floor drain.